HGM Series Micro Powder Mill
You are here:You are here:Home > Product > Mill Series >
HGM Series Micro Powder Mill
  • {dede:field.title/}
  • {dede:field.title/}
  • {dede:field.title/}

HGM Series Micro Powder Mill

Capacity:0.5-5T/H
Raw Materials:
Limestone, calcite, fly ash, calcium carbide, kaolin, calcium carbonate, coal gangue, gypsum, grain slag, ore slag, coal dust, bentonite, barite, marble, talc, refractory material
Application:
Non flammable brittle material, whose Moh's hardness is less than 6.
  • Overview
  • Features
  • Working Principle
  • Specifications
HGM Series Three-rings (Four-rings) Micro-Powder Grinder Mill is a new type of high efficient fine powder and ultrafine powder processing equipment, which is by our technology research and development center through introducing advanced foreign technology and develops for years of concentrated innovation research and design transformation. This type grinding mill is mainly suitable for grinding non-flammable and non-explosive brittle materials with low and middle hardness (mohs hardness < 6) and moisture content less than 5%, such as calcite, chalk, limestone, kaolin, talc, mica, bentonite, magnesite, illite and pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum stone, graphite, fluorite, phosphate rock, potassium ore, pumice, etc., and it is currently the best choice for super fine crushing of the non-metallic mineral.
  • 1.Long Service Life

    Service life could be 1 year. Service life is longer than wear-out part’s of impact crusher and turbine crusher if material and product size are same.

    2.High Efficiency and Low Consumption

    Under the condition of same material, power and final product size, its capacity is higher than jet mill and stirred mill by 40%.

  • 3.Superfine Powder Process

    No antifriction bearing and bolt inside the grinding cavity, no bearing or sealing element or bolt falling out and damaging machinery situation.

    4.Safety Operating

    No antifriction bearing and bolt inside the grinding cavity, no bearing or sealing element or bolt falling out and damaging machinery situation.


 

Model HGM80 HGM100 HGM125 HGM168
No.of Roller 
and Ring
No.of Roller (Pcs) 21 36 40-44 30-40
No.of Ring (Pcs) 3 4 4 4
The Feeding Size(mm)
≤20
Capacity(Kg/h) 500-5000 1000-8500 1500-12000 5000-25000
The Final Size
Micron
45-3
Mesh 3250-325
Motor Power
(KW)
Main Mill
55 110 160 315
Classifier 18.5 37 45 18.5x5
Air Blower 45 75 2x55 90x2
Screw Conveyer 3 3 2-4 2
Discharge Valve 2x0.75 2x0.75x1.1 4x1.1 1.5x20.75x2
Air Compressor 7.5 15 2x15 55
Overall Dimension
(Length*Width*Height)(M)
13.9x4x6.2 18x4.6x8.6 14x9x10.25 26.3x7.5x11.9


Write To US

If you're interested in the product, please submit your requirements and contacts and then we will contact you in two days. We promise that all your informations won't be leaked to anyone.

  • Product:
  • Name: *
  • Nationality: *
  • Email: *
  • Tel/Mobile:
  • Material a procesar :
  • Granulometría de alimentación :
  • Capacidad(t/h) :
  • Tamaño de salida :
  • Message: